1. Gigabyte Port Devices Driver Windows 10
2. Gigabyte Port Devices Drivers
3. Gigabyte Port Devices Driver
4. Gigabyte Port Devices Driver Update
5. Gigabyte Port Devices Driver Download

The following tunings will improve the performance of the Sun 10-Gigabit Ethernet device driver on a system running the Linux operating system. Create a performance tuning script (for example, ixgeperf.sh), and edit this file to add the interface or device ID of Sun 10-Gigabit Ethernet adapter.

Bran new build and I keep on getting UnKnown USB Device - Port reset failed in device manager. No matter what I do I can not install the driver. I have removed all usb connected devices on the motherboard and externally. Intel SMBus Controller device drivers are overwritten with Intel® Chipset Device Software when updated through Microsoft Windows. Update, causing a loss of functionality for affected Intel SMBus Controller devices. 1 This loss of functionality applies to Windows. 7, Windows 8, Windows 8.1, and Windows Server systems. PCI serial port is serial port connected to PCI bus (not as old COM port). Likely you will find a driver at PC/motherboard support site. The exact name of device you may find either thru device parameters or asking manufacturer's support. I suppose this device is not related with your BSOD. Please share memory dump to OneDrive for analysis.

With state-of-the-art DSP technology and mixed-mode signal technology, the RTL8153 offers high-speed transmission over CAT 5 UTP cable or CAT 3 UTP (10Mbps only) cable. Functions such as Crossover Detection and Auto-Correction, polarity correction, adaptive equalization, cross-talk cancellation, echo cancellation, timing recovery, and error correction are implemented to provide robust transmission and reception capabilities. The RTL8153 features embedded One-Time-Programmable (OTP) memory that can replace the external EEPROM (93C46/93C56/93C66/TWSI).

What's New:

Gigabyte Port Devices Driver Windows 10

• Windows 10 version 10.10
• Windows 8 version 8.31
• Windows 7 version 7.24
• Windows Vista version 6.13
• Windows XP version 5.9

The RTL8153 features USB 3.0 to provide higher bandwidth and improved protocols for data exchange between the host and the device. USB 3.0 also offers more advanced power management features for energy saving.

Advanced Configuration Power management Interface (ACPI)—power management for modern operating systems that are capable of Operating System-directed Power Management (OSPM)—is supported to achieve the most efficient power management possible. In addition to the ACPI feature, remote wake-up (including AMD Magic Packet and Microsoft Wake-Up Frame) is supported in both ACPI and APM (Advanced Power Management) environments.

The RTL8153 supports Microsoft Wake Packet Detection (WPD) to provide Wake-Up Frame information to the OS, e.g., PatternID, OriginalPacketSize, SavedPacketSize, SavedPacketOffset, etc. WPD helps prevent unwanted/unauthorized wake-up of a sleeping computer.

The RTL8153 supports ‘RealWoW!’ technology to enable remote wake-up of a sleeping PC through the Internet. This feature allows PCs to reduce power consumption by remaining in low power sleeping state until needed.

Note: The ‘RealWoW!’ service requires registration on first time use.

The RTL8153 supports Protocol offload. It offloads some of the most common protocols to NIC hardware in order to prevent spurious wake-up and further reduce power consumption. The RTL8153 can offload ARP (IPv4) and NS (IPv6) protocols while in the D3 power saving state.

The RTL8153 supports the ECMA (European Computer Manufacturers Association) proxy for sleeping hosts standard. The standard specifies maintenance of network connectivity and presence via proxies in order to extend the sleep duration of higher-powered hosts. It handles some network tasks on behalf of the host, allowing the host to remain in sleep mode for longer periods. Required and optional behavior of an operating proxy includes generating reply packets, ignoring packets, and waking the host.

The RTL8153 supports IEEE 802.3az-2010, also known as Energy Efficient Ethernet (EEE). IEEE 802.3az-2010 operates with the IEEE 802.3 Media Access Control (MAC) Sublayer to support operation in Low Power Idle mode. When the Ethernet network is in low link utilization, EEE allows systems on both sides of the link to save power.

Gigabyte Port Devices Drivers

The RTL8153 is fully compliant with Microsoft NDIS5, NDIS6 (IPv4, IPv6, TCP, UDP) Checksum features, and supports IEEE 802 IP Layer 2 priority encoding and IEEE 802.1Q Virtual bridged Local Area Network (VLAN). The above features contribute to lowering CPU utilization, especially benefiting performance when in operation on a network server.

The RTL8153 is suitable for multiple market segments and emerging applications, such as desktop, mobile, workstation, server, communications platforms, docking station, and embedded applications.

Features:

• Hardware
• Integrated 10/100/1000M transceiver
• Auto-Negotiation with Next Page capability
• Supports USB 3.0, 2.0, and 1.1
• Supports CDC-ECM
• Supports LPM (Link Power Management)
• Supports pair swap/polarity/skew correction
• Crossover Detection & Auto-Correction
• Supports Wake-On-LAN and ‘RealWoW!’ (Wake-On-WAN) Technology
• Supports ECMA-393 ECMA ProxZzzy Standard for sleeping hosts
• XTAL-Less Wake-On-LAN
• Supports power down/link down power saving
• Transmit/Receive on-chip buffer support
• EEPROM Interface
• Embedded OTP memory can replace external EEPROM
• Built-in switching regulator and LDO regulator
• Supports Customizable LEDs
• Supports hardware CRC (Cyclic Redundancy Check) function
• LAN disable with GPIO pin
• Supports 25MHz or 48MHz external clock (from oscillator or system clock source)
• SPI Flash Interface
• 48-pin QFN ‘Green’ package

Gigabyte Port Devices Driver

Download Previous Versions:

Here's other similar drivers that are different versions or releases for different operating systems:

• • January 2, 2019
  • Windows (all)
  • 10.3 MB
• • January 2, 2019
  • Windows (all)
  • 10.3 MB
• • July 30, 2018
  • Windows 7
  • 10.6 MB
• • July 5, 2017
  • Windows (all)
  • 10.1 MB
• • July 12, 2017
  • Windows (all)
  • 10.2 MB
• • May 10, 2017
  • Windows (all)
  • 10.2 MB
• • March 23, 2017
  • Windows 7/8/10
  • 10.1 MB
• • May 10, 2017
  • Windows 8
  • 9.3 MB
• • May 10, 2017
  • Windows (all)
  • 9.4 MB
• • January 20, 2017
  • Windows (all)
  • 10.0 MB

Gigabyte Port Devices Driver Update

-->

For most devices, the Ports device setup class and the Serial function driver provide the functionality required to operate serial ports and COM ports. To install serial ports and COM ports using these system-supplied components, do the following:

• Provide an INF file that specifies the Ports device setup class and the Serial function driver as the service for the port.

• To configure a serial port as COM port, comply with the requirements that are defined in Configuration of COM Ports.

Gigabyte Port Devices Driver Download

For more information about installing serial ports and COM ports using the Ports device setup class and the Serial function driver, see the following topics:

If you do a custom installation of a COM port, you must comply with the COM port requirements that are defined in Configuration of COM Ports.